CTEK, CT5 POWERSPORT BATTERY CHARGER, ACID & LITHIUM

Its that time of year when the battery of your motorcycle needs a bit of TLC to be ready when you need it again! These CTEK intelligent chargers are superb with fully automatic charging for motorcycles, scooters and similar vehicles

Vehicles are sometimes stored for long periods so the CT5 POWERSPORT battery charger makes sure your batteries are charged to capacity and your vehicle is ready to go when you are.

The CT5 POWERSPORT has been designed specifically to charge and maintain powersport batteries using advanced technology to give you three fully automatic charging and maintenance programs – Normal: for all lead-acid batteries, including AGM, Lithium*: for all lithium* batteries and Recond. You can connect it directly to the battery indefinitely, if required, and it won’t over or under charge. It’s easy to use and works with all types of 12V powersport batteries. *)12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Features

• Practical and easy to use
• Tests and restores battery capacity
• Output: 2.3A max
• Non sparking
• Reverse polarity protected
• Short circuit proof

Battery capacity: 5–25 Ah

Charging category:  AC charging

Back current drain*Corresponding to less than 1.5 Ah/month

Back Current Drain, details*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.

Battery voltage: 12 V

Battery chemistry: Lead acid (AGM, GEL, EFB, MF, CaCa); Lithium (12 V LiFePO₄) Input 220–240 VAC, 50-60 Hz, 0.3 A

Start voltage: 2.0 V lead-acid battery types. 5.0 V LiFePO₄. Output14.4/15.8/14.2 V, 2.3 A

Battery types: 12 V:; WET; MF; Ca/Ca; AGM; GEL; LiFePO₄

Ambient operating temperature:  -20 ˚C to +50 ˚C

Ingress protection:  IP65

Warranty:  5 years