Light, Indicators & Brackets
Eldorado Light in Black - Tail Tidy - Loom - Kit for Air Cooled Triumphs up to 2016
$128.00 USD
This kit is a solution to the gigantic factory rear mudguard - Completely changes the look of the bike - for the better. Kit Consists of : Motone Eldorado...
PICO LED T/S Indicator Turn Signals - PAIR - Black - M8
$128.00 USD
PICO LED T/S : TURN SIGNAL / INDICATORSA PAIR [2 TURNSIGNALS] ECE R50 - LAB TESTED FULLY COMPLIANT ROAD LEGAL CUSTOM PCB FULL METAL JACKET - ALUMINIUM HOUSING ORSAM SMD LED...
Fork Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets
$48.00 USD
Fork Clampits - SOLD AS A PAIR Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminium for you Americans) these clamps wrap around...
Royal Enfield - Indicator Wiring Harness Adapters - Interceptor/Continental/Himalayan
$16.00 USD
Sold as a Pair for a set of 2 Indicators this converts the proprietary plug used in all modern Royal Enfield motorcycles into a more standard "Japanese style" 3.9mm Bullet...
Under Seat/Rear Frame Indicator Brackets LC
$35.00 USD
These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top...
MOTOGADGET, MO.BLAZE TENS4 2IN1 TURN SIGNAL/FRONT. POLISHED
$63.00 USD
Moto Gadget two function ECE approved as front and signal light. Polished finish. M8 threaded with a miniature aluminium housing. At the time of introduction these mo.blaze tens are the smallest...
MOTO GADGET, MO.BLAZE TENS4 2IN1 TURN SIGNAL/FRONT. BLACK
$63.00 USD
Moto Gadget two function ECE approved as front and signal light. Black anodised finish. M8 threaded with a miniature aluminium housing. At the time of introduction these mo.blaze tens are the...
MOTO GADGET, MO.BLAZE TENS3 3IN1 TURN SIGNAL/BRAKE/TAIL COMBO. POLISHED
$99.00 USD
Moto Gadget 3-1 Taillight/brake light/turn signal combo. ECE approved for rear use as taillight, brake light and turn signal. Polished finish. M8 threaded with a miniature aluminium housing. At the...
MOTO GADGET, MO.BLAZE TENS3 3IN1 TURN SIGNAL/BRAKE/TAIL COMBO. BLACK
$99.00 USD
Moto Gadget 3-1 Taillight/brake light/turn signal combo. ECE approved for rear use as taillight, brake light and turn signal. Black anodised finish. M8 threaded with a miniature aluminium housing. At...
MOTO GADGET, MO.BLAZE TENS2 2IN1 TAIL LIGHT/BRAKE LIGHT. POLISHED
$63.00 USD
Moto Gadget two function ECE approved as taillight and brake light. Polished finish. M8 threaded with a miniature aluminium housing. At the time of introduction these mo.blaze tens are the...
MOTO GADGET, MO.BLAZE TENS2 2IN1 TAIL LIGHT/BRAKE LIGHT. BLACK
$63.00 USD
Moto Gadget two function ECE approved as taillight and brake light. Black anodised finish. M8 threaded with a miniature aluminium housing. At the time of introduction these mo.blaze tens are...
MOTO GADGET - MO.BLAZE TENS1 TURN SIGNAL ECE. POLISHED
$63.00 USD
Moto Gadget's very latest super bright mini indicators. Polished finish turn signal. ECE approved for front & rear turn signal use. M8 threaded with a miniature aluminium housing. At the...
MOTO GADGET - MO.BLAZE TENS1 TURN SIGNAL ECE. BLACK
$63.00 USD
– Sold OutMoto Gadget's very latest super bright mini indicators. Black anodised turn signal. ECE approved for front & rear turn signal use. M8 threaded with a miniature aluminium housing. At the...
Steel License/Number Plate Bracket for Round Tail Lights
$18.00 USD
Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller,...
Indicator/Turn Signal Brackets - for LC Triumphs - 8mm
$32.00 USD
CNC Machined out of Billet Aluminium and Anodised Black These adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 10mm...
BAAK - Side license plate holder for Triumph
$94.00 USD
– Sold OutSide license plate support / holder for Liquid Cooled Triumph T100 & T120 2016 onwards. The best looking side plate bracket assembly out there! It attaches to the upper axis of...
BAAK - Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)
$48.00 USD
– Sold OutThis bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by...
BAAK - Side speedometer holder for Triumph Street Twin / Street Scrambler
$87.00 USD
– Sold OutSide speedometer holder for Triumph Street Twin / Street Scrambler. This part enables you to relocate your speedometer on the right or left of the ignition switch to visually lighten the...
BAAK - Headlight brackets for original headlight for Triumph 2016 onwards
$86.00 USD $110.00 USD
BAAK's Headlight fixing brackets for Triumph original headlight from 2016 onwards. This pair of lighthouse brackets replaces the original Triumph boring ones revealing the full extent of those beautiful fork tubes....
BAAK - Side license plate holder kit for Royal Enfield Classic / Bullet
$112.00 USD
– Sold OutSide license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning It fixes to the upper left shock absorber axle to visually...
BAAK - License plate holder for Triumph Bobber original mudguard (2017-...)
$176.00 USD
– Sold OutLicense plate holder for the original mudguard of the Triumph Bobber 2017 to date. This tail light / license plate support unit comes in place of the original part. It's equipped...
LED Tail Light - Lecter Style + Fender Mount Kit - Polished
$86.00 USD
This retro style 'Lectar' tail light is LED. It works as a Running Light, Brake Light and Number plate illumination through window on underside. The light housing and mounting are...
LED Tail Light - Bel Air Style + Fender Mount Kit - Black
$86.00 USD
This retro style 'Bel Air' tail light is LED. It works as a Running Light, Brake Light and Number plate illumination through window on underside. The light housing and mounting...
LED Tail Light - Bel Air Style + Fender Mount Kit - Shot Blast
$86.00 USD
This retro style 'Bel Air' tail light is LED. It works as a Running Light, Brake Light and Number plate illumination through window on underside. The light housing and mounting...
LED Tail Light - Bel Air Style + Fender Mount Kit - Polished
$86.00 USD
This retro style 'Bel Air' tail light is LED. It works as a Running Light, Brake Light and Number plate illumination through window on underside. The light housing and mounting...
Triumph Turn Signal Wiring Adapter (for Air Cooled Bonnies 2001-2016)
$18.00 USD
Sold as a pair - these adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of cables required. Suitable for...
Miller 'Clean' Taillight Unit - Black Housing - LED
$38.00 USD
– Sold OutThis is the classic Miller styled stop light without the "stop" face plate and a simple CLEAN polished stainless rim to make what you see here the Miller Clean. Full...
Triumph Street Twin - Speedo Bracket
$64.00 USD
As the stock Triumph Street Twin is designed from the factory with a one piece Headlight and Speedo bracket assembly if you want to swap out the headlight brackets for...
Indicator/Turn Signal Brackets - Top Shock Mount
$38.00 USD
These are Ribbed Turn Signal / Indicator brackets in a brushed, polished or black finish. Sold in Pairs - with 2 x M8x30mm stainless mounting bolts The brackets are designed to...